AUSTRALIAN STANDARDS AS3564.1 and AS3564.3-1988/90
For the Reconditioning of Automatic Transmissions

Terminology —The word ‘reconditioned and its synonyms (eg. ‘rebuilt’ and ‘overhauled’) shall mean that subsequent to the last use of that transmission in a vehicle, the following work has been affected on the unit:

• All internal and external parts, including case and housing, have been dismantled, cleaned and inspected.
  
  
• The torque converter or fluid coupling has been spilt, cleaned and inspected.
  
  
• The valve body has been dismantled, cleaned and inspected.
  
  
• All the following have been replaced by new parts:
  (a) Lined friction plates (clutches).
  (b) Internal and external seals.
  (c) All sealing rings used in rotating applications.
  (d) Gaskets.
  (e) Disposable organic media, paper type, and non-serviceable filters.
  (f) Vacuum Hoses.
  All impaired, defective, or worn parts have been restored or replaced by new, reconditioned unimpaired parts, all measuring and adjusting of such parts having been adequately performed to manufacturer’s specifications.
  For transaxles, pinions and side gear bearings have been preloaded to the manufacturer’s specifications.
  Where present, vacuum modulator and all internal electrical and electronic components and those fitted directly to the transmission have been tested to function to manufacturer’s specifications.
  Make and model of transmission and date of transaction have been recorded.

REBUILD/OVERHAUL POLICY

Cronulla Sutherland Automatics guarantee to use only quality parts and oils in the Rebuilding/Overhauling of Automatic Transmissions and to rebuild transmissions to , or exceed, Australian Standards AS3564.1-1988 and AS3564.3-1990.